Artificial Clear Coat Resin 100ml
ACCR is our water based aliphatic hydrocarbon clear coat refining coating which helps fill imperfections, swirls and most importantly adds up to 4 microns of hard crystal clear resin.
ACCR works like a polish system but does not contain any abrasives, instead of removing microns of clear coat to restore swirls ACCR fills them while hardening the paint ready for a coat of your choice of NON solvent based protection.
Water Based Aliphatic Hydrocarbon
Durability: Permanent Adhesion
Thickness layer: up to 4 Microns
Water contact angle: 90 degrees
PH tolerance: 3-9
Hardness: Adds 4H to existing substrate.
1. Apply a liberal amount of ACCR directly to paintwork.
2. Use 12mm Dual Action polisher with a Brand New 3 inch Finishing Pad.
3. Maximum Speed Setting: 3
4. Work a 20x20cm section
5. Once ACCR disappears lightly remove any remaining residue with a clean microfiber.
WARNING: Do not use IPA/ISO panel wipe before application of non solvent based protection syste,.
6. Seal perfected paintwork with Wax or Non solvent based protection system.
Apply liberal amount of ACCR directly to painwork
Use 3inch finishing pad by hand and use medium force to apply ACCR in circular motion until product diminishes. Apply in 20x20cm sections.
Remove any remaining residue with a clean microfiber.
WARNING: Do not use IPA/ISO panel wipe before application of non solvent based protection syste,. Seal perfected paintwork with Wax or Non solvent based protection system.
Tips: Decontaminate vehicle with ph. controlled iron fall out remover every 3 months and apply ULTRA. Do not use spray and rinse sealants as any remaining residue may affect the finish of your vehicles paintwork.
*Durability is dependent on care, local weather and contamination build up.