• Load image into Gallery viewer, FLEXILIS TITAN COATINGS
  • Load image into Gallery viewer, FLEXILIS 30ml
  • Load image into Gallery viewer, FLEXILIS 30ml


Flexilis is our advanced mimetic plastic coating which can rejuvenate, enhance and protect a variety of substrates.

Flexilis is based on our HyperQuartz Carbon technology which creates a flexible membrane like protective layer.

Professional Semi-Permanent Protection of:

  • All types of Plastics, Silicones and Rubbers.
  • All types of heavy duty Vinyl/Wraps- Flexilis compliments integrated UV absorbers and heat stabilizers.

Technical Data:

  • UV/UVB resistant
  • Thermal resistance: 300c
  • Durability: 2 years with 2 layers
  • Thickness layer: Max 2.5 microns
  • Water contact angle: 105 degrees
  • PH tolerance: 1-13
  • Stackable up to 2 layers
  • Full curing time: 12 hours


Application Guidelines

  1. Apply 10-15 drops to lint free cotton applicator, cotton/foam swab, micro suede or microfiber block.
  2. Apply to surface and avoid over saturating. Lightly remove excess and allow to cure. For Vinyl wrap application- apply to a maximum 80x80cm area and remove once the product has flashed.
  3. After 2 hours a 2nd layer can be applied. Please allow 4 hours for Flexilis to initially cure before exposure to water and chemicals. Flexilis will fully cure in 12 hours.


Please wear a respirator & gloves during application of our PX Series coatings.